If you have a Fritz Box router and it is getting really old, then there’s probably a good chance you would like to know how to reset it. There are a few things to check for when you want to do this, so make sure you have this done as soon as possible.
What You Should Do
The first thing that you need to do is to check the power supply of the router. If you see that it runs on a DC supply, you can use a wire stripper to remove the insulation from this wire. You should be able to take out a little under a quarter of an inch, which is enough to get into the router.
The next thing you want to do is to make sure you remove the old plastic pieces that cover the terminals on the router. You will need to find one of these pieces to get the whole terminal off. Do not pull too hard as this can cause the circuit board to break down, but do not rip off the plastic as this may also result in the circuit board breaking down. Once you have the terminal free, use a small flat head screwdriver to pry the rest of the plastic out. If you have a replacement piece, then you can put it in the hole.
When you want to know how to reset a Fritz Box router, you need to unplug the power supply and plug in an extension cord to the router. When you plug in the extension, you will need to make sure that the cord is fully extended, and that it has been properly plugged in all the way. Make sure the extension has been properly grounded before you plug it in. Also, make sure you have the power on the router turned off.
Now, you will need to connect the extension cord to the power strip of the router. Then you need to plug the extension cord back into the power source, which will be the outlet on the side of your house. You need to make sure that the power strip is firmly attached to the wall, so you do not risk any damage to the router. You might also like fritzbox arcor login and fritzbox login.
After you have reset your Fritz Box router, all that is left to do is to reboot it to get back to work. This will require you to do the same process to any router that has a working power supply, including the one that comes with your router or one that you buy new. You should be able to successfully reset the router without any problems.
MORE ARTICLES LIKE THIS ON: ginette-beirut.com